Ultrasonic Cleaner Sensor
JYD-3828A is the 28KHz 60W ultrasonic transducer. It is suitable for cleaning with strong adhesion such as polishing wax and oil stain.
High Q value, large amplitude, high conversion rate, low heat generation, stable output, strict quality control to ensure long working life.
Maximum Ultrasonic Power(W)
Q: What’s the main problem of the ultrasonic transducer?
A: 1. The ultrasonic vibrator is damp. You can check the plug connected to the transducer with a megger. Check the insulation resistance value to judge the basic situation. Generally, the insulation resistance is greater than 5 megohms. If the insulation resistance value is not reached, the transducer is generally damp. The whole transducer (excluding the sprayed plastic case) can be placed in the oven for about 3 hours at 100 °C or used to remove moisture to the resistance value. Normal until now.
2, the transducer vibrator is fired, the ceramic material is broken, and it can be combined with the naked eye and the megohmmeter. Generally, as an emergency treatment measure, the individual damaged vibrator can be disconnected without affecting the normal use of other vibrators.
The vibrator is degummed. Our transducers are made of cemented and screw-fastened. This is not the case in general.
Perforation of the vibrating surface of stainless steel. Generally, when the transducer is used at full load for 10 years, the vibrating surface may be perforated.