JYD-2535-ZY4 is the 35khz high power ultrasonic welding transducer.
1.Low calorific value
2. Large output power
3. Small resonance impedance
4. Long working hours
5. High conversion efficiency
Q: How to maintain the ultrasonic welding transducer?
A: Daily maintenance of ultrasonic transducers:
The operator should use the equipment correctly according to the requirements of the product manual, and do routine maintenance such as cleaning, lubrication, fastening and anti-corrosion of the equipment, so that the equipment is always clean inside, clean, good performance, safe and reliable.
The electrical control box should be kept clean to prevent dust from falling into the control box, resulting in failure or short circuit of the original electrical components.
The main engine, motor and fan should be inspected once a year, and a small amount of lubricating oil should be added to remove the dust inside the motor.
The shaker must be repaired once or twice a year. Lubricate the oil for each repair and tighten the connecting bolts.
Screen replacement should be in accordance with the requirements of the operation section * to ensure uniform tension, and the wire mesh is adjusted while fastening the wire ropes at both ends.