The process of ultrasonic zipper patch is very fast and stable, and it is reproducible. It can be started immediately without preheating. The surface is high in hardness, flat and burr-free.
Jiayuanda patch cutting system features:
1. Automatic frequency chasing ultrasonic generator drive work to ensure that the ultrasonic wave is in optimal working condition under any conditions.
2. It adopts high-frequency high-power transducer and titanium alloy horn to work with high ultrasonic conversion efficiency and strong output amplitude.
3. The tool head is made of alloy steel or titanium alloy, and the surface is hardened. The ultrasonic tool head has a long service life.
Q: What’s the advantage of the ultrasonic welding?
A: 1. Fast welding speed, high welding strength and good sealing performance;
2, replacing the traditional welding / bonding process, low cost, clean and pollution-free and will not damage the workpiece;
3. The welding process is stable. All welding parameters can be tracked and monitored through the software system. Once the fault is found, it is easy to eliminate and maintain.
Second, the advantages of ultrasonic metal welding:
1. The welding material does not melt and is not fragile.
2, good electrical conductivity after welding, the resistance coefficient is very low or nearly zero.
3, the welding metal surface requirements are low, oxidation or plating can be welded.
4, welding time is short, no need for any flux, gas, solder.
5, welding without sparks, environmental protection and safety.